Repairs to uPVC Windows

uPVC windows are a fantastic choice for UPVC Window Repairs modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the old frame very easily. However If you have double pane windows that are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this situation you'll need source some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you are going to try to remove the window panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea tape the gap once the glass has been removed. This will keep drafts and water from getting into your home until a professional comes out to fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the distance between the window and the door is significant, you may prefer an alarm system that has windows. This will give you the best of both.

2. Sagging

upvc window repairs is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sliding. A sagging window can cause problems with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to unblock the windows to reach the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in position.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. The majority of the time it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close your window replacement and do an experiment fit. The corners of the sash should align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer is applied. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze, it may be hinges that are at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It's very simple to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to offer assistance.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form between the sash and the frame. These can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. The interlock, which is on the hinge side of the window and can be misaligned. Again, it is possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be positioned on top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc window you should consult an expert as soon as possible.