Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this case you'll need to locate some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will prevent water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is large, Upvc Repair you may want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll have to open the window so that you can access the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for Upvc repair an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you aren't able to move the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it could be due to the mechanism of the handle wears out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. The first step is to close your window and do an experiment fit. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may have to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This will only make your window harder to clean and reduce its energy efficiency.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it blows open with the breeze. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they can wear down over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is simpler with someone else to assist in holding the frame in place.

Verify that the upvc window repairs hinges are open and closed in the right direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should be opened.

The problem can be caused either by opening the window improperly or due to a poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to offer advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash joins the frame. If they are beyond repair, it might be necessary to get them re-aligned. Second, the interlock can also become disaligned. This is located on the hinge side and might require to be cleaned. In some instances it is possible to replace them.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.