Double Glazing Seal Repairs

When double glazing window replacement seals fail, it can lead to damp and mould. This could cause damage to the frame and surrounding walls and affect your health.

Fortunately, the majority of uPVC windows can be repaired by resealing, rather than replacement. A glazier will typically clean the frame of the window and the glass, apply a new bead of sealant and smooth it.

Water Leaks

Window seals are made to prevent water to stay out of your home. When they start to wear out, water may get into your windows. A window that leaks isn't only annoying but it can cause significant damage to the surrounding structure of your home. It is crucial to spot the issue early and have it fixed by an expert before it gets worse.

Often, the source of your leaking windows is not in the glass but on the frame and sill. A leak in this region is the most typical sign of a failed window seal. It can be caused by damage to the window seal as a result of weather or aging, worn out caulking or even an obstruction to drainage that results in the accumulation of water or ice.

Water appearing between the double-glazed panes is a common sign that your window seal is failing. This isn't as hazardous as a water leak, since the water doesn't travel far enough to reach into your home. However, it does mean that the inert gases that are sandwiched between your panes have escaped out. This will reduce the effectiveness of the insulation in your window.

The last sign of a failed window seal is condensation between the panes. This may be caused by a failed window seal, or it could be due to the humid climate of your home or a problem with the glass. The condensation may not only be a nuisance, but it could also cause the development of mildew and mould in your home that is difficult and expensive to eliminate.

If you're seeing these signs, it's time for an inspection of your double-glazed windows. A repair or replacement will ensure your home is protected from water leaks, reduce energy costs, and even prevent draughts. It's a small expense to pay for your family's security and comfort. Contact Thompson Creek Window to discuss your options for window seal repair or replacement. Our knowledgeable professionals are ready to assist! We provide assistance to homeowners throughout the Mid-Atlantic.

Condensation

A damaged seal on the double glazing can allow water into the gap that is used to insulate. This water can cause fogging or misting within the window panes.

If you notice condensation inside your home, it's time to contact a double glazing repair company. Condensation is a sign that the seal created by the factory has failed and water is leaking into the gap between the insulated and non-insulated.

Condensation is caused by a variety of factors however, the most common cause is gaskets, sealants, or insulation in the uPVC frames of the windows. As a result, there are a few different double glazing seal repair options, but it is essential that the new seal is correctly measured to ensure a perfect fit and a water-tight seal.

Typically, the gaskets that are used to fill in the gaps between double-glazed units are constructed from a material such as polyurethane foam. They are designed to last for a long time, but can become damaged in time as a result of wear and tear or exposure to changing temperatures and weather conditions.

Over time the foam will shrink or crack. This can lead to cracks in the seal, allowing moisture to seep into the double-glazed window. This not only creates condensation, but can cause the loss of energy efficiency, meaning that you're losing heat from your home to the outside air.

Re-sealing the windows is a way to fix this problem. However, this is not certain to solve the issue because it could only eliminate the condensation that has formed. It will not address the root issues that cause your double-glazed windows to leak or develop condensation.

A professional who can offer an insurance-backed guarantee should replace your windows in full. This means that in the event that the company fails or goes bust you'll still be covered by the insurance. It's important to know that replacement windows must be warranted for at minimum 10 years.

Misting

As the fall months get closer it's a good idea to ensure that your double-glazing seals are in good working order. Window seals that are worn-out can impact your windows' insulative properties as well as cause condensation, mold and dampness. It is essential to address any problems with your double-glazed windows as soon as you can to avoid further damage and save on energy costs.

A typical double-glazed window is made up of two panes of glass joined by an internal space that's filled with gas. The sealant layer on the outside fills the gap between uPVC frames and the glass. This is crucial to maintaining the air-tight seal that keeps warm and cold air separate in your home, thereby saving the cost of heating. However, over time, these seals can break down due to ageing and weather conditions, or inadequate installation. Once this happens, the magic insulation formula that makes double glazed windows so effective could begin to degrade.

If not checked or unchecked, damaged or defective seals can cause condensation and damp that can not only affect the appearance of your windows, but can also affect your health. The dampness and moisture can cause damage to ceilings, walls, floors and other surfaces in your home. They can also cause allergens and irritants that can be detrimental to your health and the health of your family members.

One of the most common problems that can arise with your double glazing is that it can leak in between the panes. This happens when moisture gets into the insulated area of your window. This is difficult to fix without professional double glazing seal repair.

There are DIY ways to deal with this issue, however, we'd advise against it because it's not just risky but can be extremely messy and damage your windows. These methods involve drilling into your glazed unit and using chemicals to remove fog & condensation. This could cause a number of issues, including the possibility of exposing your windows and units to water damage.

Professional glaziers possess the knowledge, tools and double glazing experience to effectively reseal your uPVC frames and provide you with long-lasting results. Additionally, they can also offer suggestions on the best way to maintain your uPVC windows to prevent future problems.

Draughts

A draft coming from your window means that the sealant may have broken down. It is recommended to repair it or replaced. This will stop cold air from entering your home, increase energy efficiency and lower heating costs and make a difference to the comfort level and temperature control.

It is also important to remember that not all draughts originate from the window seals but from the gap between the frame and the bricks. In some cases it may be possible to fix this by simply caulking the gap. However, if this method is not working, it will require resealing professionally.

When the sealant around double-glazed windows begins to fail and allows water to infiltrate. This can result in damp or even mold. This could affect your health and may be damaging to your property. If you notice any problems with water ingress, you should take action promptly. If your windows are still covered by a warranty you should find out if the company that sold them will cover the cost.

The windows themselves are typically covered by a warranty that can be a minimum of 10 years, but some businesses offer lifetime warranties - therefore it is worthwhile checking this information out. If your double glazing is under warranty, you must contact the company who sold them as quickly as you can and let them know about any issues you're experiencing. It is recommended to do this in person, or via letters and emails, to ensure everything is recorded and clear.

It is important to note that draughts may be caused by faulty hinges, rather than an ineffective seal. The hinges cover the window sash which is the one that you open. If they are not regularly oiling them and become stiff, they may develop. This could cause a gap to develop between the frame of the sash and the sash, which lets cold air to enter the home. Replacing the hinges can solve this issue without affecting window seals.