Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need locate some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the distance between the door and the window is substantial, you may prefer security screens that has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a number of problems that include sagging. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you cannot reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose Upvc Window Repair handle. The first step is to close the window and then perform an experiment fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Based on the severity of the issue the old caulking may need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This can make your window harder to clean and lower its energy efficiency.

Verify that the drainage holes do not have debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens in the breeze. They can be easily repaired by any DIYer who is skilled and Upvc window Repair are usually completed in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or by poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are more than happy to provide assistance.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. First, the hinges because of wear and tear, can become misaligned, this causes gaps to develop where the sash window repair meets the frame. They can be repaired by giving them thorough clean, however in the event that they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it's possible to give them a clean but in some instances it could be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repair, your upvc windows will continue to provide excellent security and insulation for your home. However, it is important to realize that all windows have a life span and they may reach the point when it's more economical to replace them than repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as possible.